Olympus FV5-LD405, Руководство пользователя

Страница: 21 / 92

Cautions when using the system
I. SAFETY GUIDE
I .
3 - 1
Page
3 Cautions when using the system
3-1 About system move
z Assembling and setup of this system are executed by our service parsonnel. Avoid move of the system as
it may put optics system out of order. When the move of this system is required, contact and consult with
our local sales office. In an event of disorder or breakage of the system due to the move by customer, we
hold no responsibility.
3-2 Caution when using
z
Handle this system with utmost care in order not to give a shock as it is precision instrument.
z Do not bend, pull or step on fiber excessively. Performance would severely be deteriorated. (when using
FV5-LD405 only).
z
Power cable is also used to stop power supply against unlikely event. Power cable connector (located at
back panel of FV5-LDPSU) or power consent should be within a reach of your hand. Set the power supply
unit at the place where you can remove power cable easily against unlikely event. However, do not
remove it during power supply except emergency situation.
z
Do not move the system by pulling power cable.
z For environment condition of usage, see
II
Chapter 2 – Specifications.
z When you clean each section, use soft cloth that contains diluted mild detergent and wipe out gently. Do
not use organic solvent as it would deteriorate paint or plastic parts.
3-3 Caution
Safety may not be guaranteed if the system is used by other methods than those described in this manual and
failure may occur. Use this system in accordance with this manual.