background image

FVMPE-RS

1

1

 Before starting service work

This system is a Class 4 laser product. These products may expose the human body to dangerous laser beams. Please 
be thoroughly informed about laser safety and observe the following precautions when working with these products.
During the service work, be sure to avoid those other than service workers entering around the device.
Before conducting the service work, be sure to perform the works described in "1-5  Confirmation when working with 
FVMPE-RS" and "3-3  Completing the observation with this system (Operation)" in [Operation/Maintenance] in FVMPE-RS 
User's Manual.

1-1  Laser classes and danger levels

•   This system is a Class 4 laser device. Not only direct and specular reflection laser beams but also 

diffuse reflection beams are dangerous.

•  Only Olympus technical personnel are allowed to assemble and set up this system. 

When people who are not Olympus technical personnel did a change (disassembly and modification) 
of a device which is not mentioned in this service manual, problems such as system malfunction, 
breakage or an accident may occur. We will provide disassembly, relocation and other services for a 
fee.

•   Keep the objectives away from anything that has a mirror surface.

•   Keep the device away from any combustible gas or liquid to prevent fire.

•   It is dangerous to remove the objectives, the nosepiece caps and/or nosepiece, as this causes 

irradiation of laser beams that are parallel, not diffused.

•    This system uses an IR pulse laser, which has an element of danger to cause blindness if it enters the 

eye.

•   This system generates laser beams with a near-infrared wavelength, which are invisible and danger-

ous.

•   Total laser radiation emitted from this system are as follows: 

 

MPE (Maximum Permissible Exposure) : 0.016 J/m

2

 (for a single pulse)

 

 

 

 

 

       0.00005 J/m

2

 (for a single pulse in the pulse train)

 

NOHD (Nominal Ocular Hazard Distance) : 50 cm in the vicinity of objective lens * 

 

Exposure duration : 3 X 10

4

 sec

 

 

 

 

 

* Hereafter, this area is called “Laser Hazard Area”.

CAUTION

Class

Description of danger level

Class 1

Lasers are safe when any kind of optical system is used.

Class 1M

Degree of danger is equal to that in Class 1 for naked-eye observation. However, observation through an 
optical device is dangerous.

Class 2

This class applies to visible-light lasers with wavelengths of 400 to 700 nm, and safety is ensured by the 
aversive reaction of eyes.

Class 2M

Degree of danger is equal to that in Class 2, but use of an optical device is dangerous.

Class 3R

Direct beam observation is potentially dangerous.

Class 3B

Direct beam observation is dangerous.

Class 4

The lights of lasers of this class, being able to cause diffused reflection that is deemed dangerous, pose the 
danger of causing fire as well as of damaging skin.
All laser products that can cause an amount of laser light radiation exceeding the accessible emission limit 
for class 3B  upon human bodies.

Содержание FLUOVIEW FVMPE-RS





























Отзывы: