Olympus EVIS EXERA III, Инструкция по эксплуатации

Страница: 74 / 130

68
5.2 Operation workflow
CLV-190 INSTRUCTION MANUAL
Ch.5
Please see the operation workflow below. Follow each step of the workflow for using the light source.
5.2 Operation workflow
1
Inspect the light source and the ancillary equipment.

Chapter 4 on page 41
2
Turn the light source ON and ignite the examination lamp.

Section 5.3 on page 69
3
Set the brightness mode.

Section 5.4 on page 70
4
Adjust the brightness of the examination lamp.

Section 5.5 on page 71
5
Operate the light source.
• Optical-digital observation  Section 5.6 on page 74
• Transillumination  Section 5.7 on page 76
• High intensity mode  Section 5.8 on page 77
• Air and water feeding  Section 5.9 on page 78
6
After examination, extinguish the examination lamp or turn the
light source OFF.
• Extinguish the examination lamp  Section 5.10 on page 79
• Turn the light source OFF  Section 5.11 on page 80
7
Disconnect the endoscope.
8
Care for and store the light source and accessory as appropriate
after use.

Section 7.1 on page 93