manualshive.com logo in svg

Olympus EPOCH 650, Руководство пользователя

Поделиться
Скачать
Olympus EPOCH 650 Скачать руководство пользователя страница 57

DMTA-10055-01EN, Rev. A, February 2015

Powering the EPOCH 650

 

45

•

Store batteries in a cool, dry environment. 

•

Avoid long-term storage under sunlight or in other excessively hot places such as 
an automobile trunk. 

•

While in storage, fully recharge batteries at least once every two months.

•

Never place partially discharged batteries in storage without a full recharge. 

2.2

AC Charger/Adaptor 

The EPOCH 650 AC charger/adaptor is provided with every instrument. The 
charger/adaptor allows you to power the EPOCH 650. When a lithium-ion 
rechargeable battery is installed in the instrument and the charger/adaptor is 
connected, the battery charges.

The EPOCH 650 charger/adaptor is designed to charge EPOCH 650 batteries only 
(P/N: 600-BAT-L-3 [U8051431]). Do not attempt to charge any other batteries or use 
any other chargers/adaptors. Doing so can cause an explosion or injury.

To connect the AC charger/adaptor

1.

Connect the power cord to the charger/adaptor unit and to an appropriate power 
outlet (see Figure 2-2 on page 46).

Use only the AC power cord supplied with the EPOCH 650. Do not use the supplied 
AC power cord with other products.

Содержание EPOCH 650











































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды