manualshive.com logo in svg

Olympus EPOCH 650, Руководство пользователя

Поделиться
Скачать
Olympus EPOCH 650 Скачать руководство пользователя страница 233

DMTA-10055-01EN, Rev. A, February 2015

Data Logger

 

221

10.6 Screen Capture

The EPOCH 650 allows you to quickly capture on-screen information like the Print 
Screen command on a PC. The captured screen image is saved to the microSD card 
(included with the instrument) as a bitmap (.bmp) file type.

To capture and save a screen image

1.

Insert a microSD card.

2.

Set up the EPOCH 650 to display the information that you want to capture.

3.

Press 2

ND

F, F1 to capture the image.

The screen freezes for a few seconds, then the unit beeps when the save is 
complete.

4.

Remove the microSD card and insert it into a PC card reader (adaptors for this 
purpose are included with the instrument). The saved screen shots are titled 
“BMP0.bmp, BMP1.bmp, BMP2.bmp,” etc., as each screen shot is saved.

10.7 Video Record

The video recorder allows you to record, save, delete, and play back live screen video. 
You can also view the video on a PC or export video to or import from other 
EPOCH 650 ultrasonic flaw detectors.

10.7.1

Activating the video recorder

Before activating the video recorder, set up the EPOCH 650 to display the events you 
want to record.

To activate the video recorder

1.

Choose 

Video Record > Setup

 (group 5/5).

2.

Press 

On

 (P2 key) to activate and display the video recorder controls.

10.7.2

Using the video recorder

Using the video recorder includes the activities associated with recording and 
managing video files.

Содержание EPOCH 650











































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды