Olympus E-M1 Mark III, Инструкция по эксплуатации

Страница: 148 / 333

148 EN
Menu functions (Shooting menu)
4
Focus BKT (Focus bracketing)
Take a series of shots at different focus positions. Focus moves
successively farther from the initial focus position. Choose the
number of shots using [Set number of shots] and the change
in focus distance using [Set focus differential]. Choose smaller
values for [Set focus differential] to narrow the change in focus
distance, larger values to widen it. If you are using a fl ash other
than the dedicated fl ash unit, you can specify the time it takes to
charge using the [
#
Charge Time] option.
Press the shutter button all the way down and release it
immediately. Shooting will continue until the selected number of
shots is taken or until the shutter button is pressed all the way
down again.
• Focus bracketing is not available with lenses that have
mounts conforming to the Four-Thirds standard.
• Focus bracketing ends if zoom is adjusted during shooting.
• Shooting ends when focus reaches infi nity.
• Pictures taken using focus bracketing are shot in silent
mode.
• To use the fl ash, select [Allow] for [Silent
s
Mode Settings]
(P. 157) > [Flash Mode].
• Focus bracketing cannot be combined with other forms of
bracketing.
• The fl ash sync speed is set to 1/50 s. Selecting a value over
ISO 8000 for [
K
ISO] sets the fl ash sync speed to 1/20 s.
• Olympus Workspace can be used to stack [Focus BKT]
pictures taken using lenses that support [Focus Stacking].
• See the OLYMPUS website for information on the lenses
that can be used with [Focus Stacking].
ART BKT
ISO BKT
Focus BKT
WB BKT
AE BKT
FL BKT
3f 1.0EV
--
--
--
--
A-- G--
100
%
Back Set
Bracketing
Off
On
Set number of shots
Back Set
0 0 3
100
%
On
8
5
Focus BKT
100 %
Back Set
Set number of shots
Focus Stacking
Set focus differential
# Charge Time 0sec
10
1
3
Wide
Narrow
#
Charge Time
30sec
Select time between shutter
release for flash recharge.
This setting is not necessary
when using an Olympus flash.
100
%
Back Set