Olympus CLV-160, Руководство по обслуживанию

Страница: 27 / 56

TROUBLESHOOTING CLV-160
Automatic brightness adjustment check 1
(Automatic brightness adjustment with the
scope pin)
The visual field is dark or too bright.
Manual brightness
adjustment check
Connect to the system
allowing automatic
brightness adjustment.
Connect the CV and scope.
Does the automatic
No
brightness adjustment work
correctly?
Yes
Is INDEX appropriate?
(Usually, “0” is standard.)
Yes
Does the automatic
brightness adjustment work
correctly?
No
Check the harness
connection.
UPCL16CR00 UPNS6OU
Yes
Does the automatic
brightness adjustment work
correctly?
No
Connect the automatic light
control cable (MH-966) to the
connector on the rear panel.
Does the automatic
N o
brightness adjustment work
correctly?
Yes
Replace the S socket 1U.
(Replace the scope socket
unit.)
Replace the UPCL16CR00.
(Replace the main board.)
Yes
Does the automatic
brightness adjustment work
correctly?
No
Check the connected CV or scope.
End
4-18