100
E
“Write error occurred during file creation.”
This error occurs when data cannot be saved at the selected
location on the hard drive. This could be because there is not
enough space available, write protection is enabled, or the
disk is damaged. Once you have determined the cause of the
error, and applied an appropriate countermeasure, try saving
again.
“New file cannot be created.”
This error occurs when data cannot be saved at the selected
location on the hard drive. This could be because there is not
enough space available, write protection is enabled, or the
disk is damaged. Once you have determined the cause of the
error, and applied an appropriate countermeasure, try saving
again.
“Media inserted is not FlashPath.”
This error occurs when any media other than the FD adaptor
(FlashPath) is inserted. Quit the utility program, eject the disk,
and start over.
Macintosh : Go to page 108.
