Olympus BIX III, Руководство пользователя

Страница: 47 / 102

10-015490-01EN, Rev. 2, June 2020
Set Up and Operation 39
Figure 3-5 Sample sieves
3.4 Loading a Sample
Before you can load a crushed sample into the BTX III analyzer, you must remove the
sample carrier from the instrument, then load the sample into the sample cell.
There are four components of a sample cell (see Figure 3-6 on page 39):
• An inner cell window comprised of a polymer window on a metal frame with a
notch at the top
• A spacer, which is assembled between the inner and outer cell
• An outer cell window that also has a polymer window on a metal frame, but
without a notch at the top
• Screws to secure the cell assembly to a sample cell carrier
Figure 3-6 Sample cell window components
Inner window
Spacer
Outer window Screws