Calstar
操作及保養
說
明書
OPERATION AND MAINTENANCE
HANDBOOK
A10Ex
25
溶劑桶必須有兩個開口
﹐一個是作被回收溶劑之入口﹐另一個是作
溶劑蒸汽之透氣口
﹐而透氣管必須拉到室外﹐桶體接地工作必須在每次
蒸餾回收前完成
.
在
每次蒸餾回收前必須執行上述步驟
﹐以避免溶劑蒸汽在密閉空間
裏積累及
產生靜電
.
The tank of the recovered solvent must have two openings, the one for
the recovered solvent inlet, and the other one as breathing of the solvent
steams. The breather pipe must be taken outside. The grounding of the tank
must be executed.
These operations must be executed before every distillation cycle and are
necessary to assure that solvent steams do not spread in closed places and to
prevent from the creation of electrostatic charges bunching.
13.2
檢
查蒸汽管路及桶蓋墊圈
(
Check of the steam pipes and lid seal
)
每次蒸餾回收之前必須檢
查蒸汽管路是否阻塞或洩漏﹐這可延長桶蓋墊圈之壽命
.
(
This check must be executed before every distillation cycle and is necessary to make sure of the absence of
obstructions and leaks in the steam pipes. It is also useful for establishing the good condition of the lid seal.)
請小心維護桶蓋
墊圈
!
墊圈洩漏會造成大量可燃蒸汽外泄
,
引起起火
及爆炸風險增大
!!
桶蓋
墊圈是以耐高溫耐溶劑之特殊材質製成
﹐請不要隨意更換不是
來源於製造商或代理商之
墊圈
.
The lid seal is made of high heat and solvents resistant special material.
Never replace this seal with another one which does not come directly
from
Calstar
or from an authorized reseller.
13.3
檢
查程式
(
Check procedure
)
●
關掉主電源開關
. (
Cut out the electrical feeding of the unit
)
●
松掉桶蓋鎖緊手柄
. (
Unscrew the knob.
)
●
打開桶蓋
. (
Open the lid.
)
●
關閉溶劑輸出閥門
.
(Close solvent output valve.)
●
检查桶内是否干净
(Check whether the tank inside is clean)
14.0
進料
(
FILLING
)
