Do Not Attach Walls To
Floor Until Step 23
Side W
all
Rear W
all
Optional
- Caulking seams
will help prevent moisture
from entering your shed.
Caulking not included in kit.
16.
Position side solid wall into place on plywood floor. Butt both vertical
wall studs of side and rear walls together and attach with
3 - 2 1/2” Screws
.
Screw at the bottom, middle and top of stud to secure properly.
Hardware (Steps 16 -18)
S1
- 2 1/2” Screws
x 18 total
Rear W
all
Side W
all
17.
With the corner wall attachment complete, position a second Side Wall panel in place so bottom
2x3 wall framing is sitting flush with outside floor joists and plywood floor. Wall siding should overhang
floor by approximately 1/2”. When positioned correctly, attach both Side Wall panel studs together as
shown.
Pilot Hole
first.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13