Olivetti S2, Руководство пользователя, Страница: 43 / 63

589402 User Manual 3-7
NOTE:
During printing suspension, and due to the high temperature of the nozzle, the material may continue
to flow causing the printed piece to become distorted.
To cancel a printing job, access the menu, using the jog dialer select Stop Printing, then confirm by pressing the
jog dialer.
Printing is cancelled.
Note that the extruder assembly will remain stopped at the last position assumed before printing was cancelled.
You must therefore either move the extruder manually using the menu commands or execute a homing
procedure.
Extracting the printed pieces
Once printing is terminated, wait until the printing table reaches normal environmental temperature (if it has been
heated) before removing the printed part using the spatula provided.
As the piece could be stuck to the printing table quite firmly, work slowly and carefully to avoid damaging it.