Olivetti S2, Руководство пользователя, Страница: 21 / 63

589402 User Manual 2-3
Figure 2-4 Blue-coloured display screen after Bed Setting is selected
4. Press the jog dialer again.
The extruder assembly moves to the first Adjustment position (there are 5 in total). Try to pass the 0.10 mm
feeler gauge supplied between the Extruder 1 nozzle and the tempered glass. If the feeler gauge moves
freely between the nozzle and the glass, you must work on the reference self-locking nut turning it in the
clockwise direction until no light passes between the glass/ gauge/nozzle. In the opposite case
– if the
nozzle is too near the glass (i.e. feeler gauge cannot be inserted) - then work on the nut in the opposite
direction (i.e. anti-clockwise), until the right amount of space is left between the nozzle and the table.