Olivetti S2, Руководство пользователя, Страница: 41 / 63

589402 User Manual 3-5
Figure 3-2 Dual extruders in slicing SW
Refer to the Slicing SW manual for the correct settings for the dual extruders and based on the type of result
you want to obtain.
Once the GCODE is generated for the two extruders, all you have to do is issue the print command using the
procedures already described for using a single extruder.
Suspending and interrupting printing
Using the menus you can suspend or cancel a print job after it has been started.
To suspend printing, press the jog dialer and access the menu. Rotate the jog dialer to select the Pause
command then press the jog dialer again.
Printing is suspended and the extruder assembly stops at exactly the same point as printing was interrupted.