43
PROGRAMMING
M E S S A G E S
1 :
M E S S A G E S
2 :
3.
Press START to activate the selected function.
To store the first message, go straight to the next step,
or :
press
∨∨∨∨∨
or
∧
∧
∧
∧
∧
to select the message you want to store,
e.g. 2.
Otherwise, type the number on the numeric keypad.
If the message has been stored it will appear beside
the number.
If this is the case, choose another message (using
∨∨∨∨∨
or
∧∧∧∧∧
) or look ahead in the procedure if you want to
change the previously stored message.
4.
Press START to start storing (or to change) the
selected message (2).
5.
Enter the desired message (max. 20 characters).
Each character is entered by pressing the
∨
or
∧
key
to scroll through the entire set of alphanumeric
characters until the desired character is displayed and
then by pressing the CONFIRM key to confirm
selection. (For a complete list of the alphaumeric
characters available, refer to the “CHARACTER SET
TABLE” chapter).
If you want to leave a blank between one character and
the next, press the > key to move the cursor one
position forward.
To delete an entire setting, press CLEAR.
If you want to delete one of the characters set, move
to the character to be changed (using the < or > key)
and overwrite it with the correct one.
6.
Press START to confirm the message set.
After message 2 has been stored, the facsimile ma-
chine is automatically set for storing the next message.
Repeat the procedure from step 5 if you want to
continue programming messages, or:
☞
S T O R I N G M E S S A G E A
2 :
S T O R I N G M E S S A G E E
2
:
C O N F I D E N T I A L
M E S S A G E S
3 :
