19
When the transmission has terminated, if it has been
enabled, the fax machine will automatically print out a
broadcasting report (if the document was sent to sev-
eral remote parties) or a transmission report (if the
document was sent to one remote party). See the
section "Reports and Lists" further on.
To interrupt the transmission, follow the procedure
described in section "Transmitting a Document".
The fax machine automatically cancels all memorised
transmissions after a successful transmission.
Once set, transmission from memory can be:
•
modified only if it is not in progress,
•
resent only if programmed to do so should transmis-
sion fail (see “Enabling/disabling the re-trans-
mission of a failed transmission from memory”
chapter “For a more sophisticated use"),
•
cancelled at any time.
See procedure in the next section. You can also request
the printout of the relative parameters. The parameter
printout contains the following information:
•
Doc N.
Reference number of the
stored document. This num-
ber associates a document
to each transmission (single
or broadcasting) operated
from memory.
•
Pages
Total number of pages of
the stored document.
•
Set for:
Date and time at which the
transmission was stored in
memory (single or broad-
casting).
•
Act. N.
Progressive number of each
transmission stored in
memory. In case of broad-
casting, the number in-
creases for each single
transmission associated with
the broadcast.
•
Dialled Number
Fax number on the remote
fax that you have called.
•
Date/Time
Date and time at which the
transmission was carried out
from memory. In case of
broadcasting, it will indicate
the date and time at which
each transmission associated
with the broadcasting has
been carried out.
•
Status
Status of transmission from
memory. In case of broad-
casting transmission, the
status of each single trans-
mission associated with the
broadcasting will be indi-
cated.
Besides the above-mentioned parameters, the fax prints
a small portion of its text to help you identify the
stored document.
CHANGING/RESENDING/CLEARING A
PRESET MEMORY TRANSMISSION ...
Procedure
DISPLAY
1
Make sure you have
set a transmission from
memory.
AUTOMATIC RX
MEMORY TX
2 Press the FUNCTION
key.
TX FROM MEMORY
3 Press the START key.
ALREADY ENTERED
4 Press the START key.
PRINT SETTING?
If you only want to print the relative parameters, press
the START key. When the printout is completed the fax
machine returns automatically to the initial waiting
mode.
If you want to change, resend or clear the transmission
set, proceed as follows:
5 Press the </> keys to
show one of the two
other options available:
"CHANGE PARAM.?"
or "CANCEL
SETTING?" (In the
example: "CHANGE
PARAM.?") then press
the START key to
confirm your selection.
CHANGE PARAM.?
☞
-3-13-31.p65
02/04/01, 9.18
19
