17
Procedure
DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
22-03-99 15:10
2 Insert the document in
ADF.
DOCUMENT READY
ê
NORMAL
3
Select the contrast and
resolution you consider
most appropriate.
4 Press the FUNCTION
key until the display
shows --->
DELAYED TX
5 Press the START key.
The display requests
you to enter the time of
transmission. e.g.
“17:00”.
TYPE TIME
HH:MM
6 Press the START key.
TYPE FAX NUMBER
NUM/TOUCH/SPEED
7
Dial the number of the
remote party, using any
one of the dialling
procedures. For
example, key-in the
number directly on the
numeric keypad of your
fax.
TYPE NUMBER
011 233323
8 Press the START key
to confirm the setting. If
the fax machine is
enabled, it will
automatically print the
parameters of the
delayed transmission
(see in this chapter
“Reports and lists”),
and “PRINT DELAY
TX” is displayed. It then
returns to its initial
waiting mode.
AUTOMATIC RX
TX AT 17:00
You can clear the setting for the delayed transmission
by removing the document from ADF or by pressing
the STOP key.
Procedure
DISPLAY
1 Press the HOOK key
on your fax, to connect
to the line.
TYPE NUMBER
_
2 Dial the remote party
number on the numeric
keypad of your fax.
TYPE NUMBER
230087
7. If you want to use rapid dialling procedures
The fax machine also has rapid dial features: one-
touch dial and speed dialling. To use these fea-
tures, you must programme them as described in
the section "Programming one-touch dial and
speed dialling".
Once you have programmed them, it will be suf-
ficient to press one key (one-touch dial) or a key
followed by a two-digit numeric code (speed di-
alling) to dial a number (see "Transmitting with
one-touch dial" and "Transmitting with speed
dialling").
TRANSMITTING A DOCUMENT AT A PRESET
TIME (DELAYED TRANSMISSION)...
This feature allows you to avoid time zone problems, if
the remote party is thousands of miles away, and also to
avoid paying high rates by selecting times with less traffic
on the lines.
-3-13-31.p65
02/04/01, 9.18
17
