Olivetti FK-507 Скачать руководство пользователя страница 24

Страница: 24 / 118

Field Service Ver. 2.0 Dec. 2008

5. Utility Mode

FK-507

Adjustment / Setting

(3) Reception user box

5.5.2

Fax Settings

A. Self-ID

B. RX Functions
(1) Reception Mode

(2) Numbers of RX Call Rings

C. Password Communication

Functions

• A reception user box specifically for documents containing special information, such as

Fcodes, can be created, and the reception method can be specified.

Use

Setting/
Procedure

Touch the [RX Document].

Touch the button of the user box to be specified.

Touch [User Box Name] and enter the user box name from the 10-key pad.
(A maximum of 8 characters can be entered.)

Touch [Type] and select the reception management type.

Touch [Number] and enter in the number appropriate for the reception type from the
10-key pad.

Touch [Password] and register the password.
New Password: Enter the new password to be used
Confirm New Password: Re-enter the new password

Touch [RX Doc. Settings], then select the desired processing type and touch [OK].

* If [Forward] or [Print & Forward] is selected, set the forwarding destination.

If F-codes are used, touch [Remote Input Check] and select whether remote input
checking is enabled or disabled.

Functions

• To register the name, telephone number, and other information of the local machine as

an ID.

Use

• When the registered information is to be printed on journals and displayed on the panel

of the fax machine on the receiving end.

Setting/
Procedure

Touch the [Self-ID].

Enter the local machine ID (up to 12 characters) and touch [OK].

Functions

• To set the reception mode of faxes.

Use

• When changing the reception mode of faxes.

Setting/
Procedure

• The default setting is “Auto”.

“Auto”

Manual

Functions

• To set the number of call rings heard before automatic reception is activated.

Use

• When changing the number of call rings heard before automatic reception is activated.

Setting/
Procedure

• The default setting is “1x”.

1 to 20

Functions

• To allow a fax to be received only when there is a match in the password that has previ-

ously been registered on the transmitter and receiver ends.

Use

• When using password reception.

Setting/
Procedure

• The default setting is “00”.

“00” (Disabled)

01 to 99 (Enabled)

Y109971-7 Sevice Manual

Содержание FK-507






















































































































Результаты поиска

Содержание FK-507

Отзывы:

Бренды по названию

Популярные бренды

Olivetti FK-507, Руководство по обслуживанию

Результаты поиска

Содержание FK-507

Отзывы:

Бренды по названию

Популярные бренды