Olivetti d-COPIA 1801 MF, Руководство по эксплуатации

Страница: 50 / 215

2-22
Installing and Setting up the Machine > Setting Energy Saver Function
Setting Energy Saver Function
To use the Energy Saver function, configure the following settings:
• Sleep and Sleep Timer (page 2-22)
• Power Off Timer (page 2-23)
Sleep and Sleep Timer
Sleep
To enter Sleep, press the [ Energy Saver ] key. [Sleeping] is displayed on the message display, and all indicators on the
operation panel will go out to save power except the [ Energy Saver ] indicators. This status is referred to as Sleep.
If print data is received during Sleep, the print job is performed while the message display remains unlit.
To use the machine, press any key on the operation panel.
The machine will be ready to operate within 11 seconds.
Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly.
Sleep Timer
Sleep Timer automatically switches the machine into Sleep if left idle for a preset time.
The default preset time is 1 minute.
To change the preset sleep time, refer to
Sleep Timer on page 7-12 .
Follow the steps below to set the sleep timer for the machine to go into sleep mode when not in use.
1
Display the screen.
1
Press the [ Status/System Menu/Counter ] key.
2
Press the [ ▲ ] or [ ▼ ] key to select [Common Settings], and press the [ OK ] key.
Status/Sys. Menu
Common Settings
2 1