Olivetti d-COPIA 1801 MF, Руководство по эксплуатации

Страница: 114 / 215

5-33
Operation on the Machine > Scanning
Use Your Desired Destination
If there are settings that you change from "My Documents" in the computer (Host PC) connected to the machine
via USB, set the destination by using Client Tool. You can simply select the destination number as needed to recall
those functions.
Ten destinations including the default [Local PC] can be registered. Refer to
Default Settings on the PC (Client
Tool) on page 7-16 .
1
Start Client Tool on the Host PC.
Refer to Accessing Client Tool on page 2-18 .
2
Press the [ Scan ] key on the machine.
3
Place the originals.
4
Select the destination number.
Press the [ ▲ ] or [ ▼ ] key to select a destination number (01 to 10) to recall, and press the [ OK ]
key.
5
Press the [ Start ] key.
Scanning starts.
When the scan ends, the folder in which an image is saved opens on the Host PC.
Loading Originals (page 5-2)
NOTE
The name set by using Client Tool appears. [----------------] appears for the
destination for which no name is set.
Ready to scan.
Local PC
2 1