Olivetti d-COPIA 1801 MF, Руководство по эксплуатации

Страница: 85 / 215

5-4
Operation on the Machine > Loading Originals
1
Adjust the original width guides.
2
Place the originals.
Put the side to be scanned (or the first side of two-sided originals) face-up. Slide the leading
edge into the document processor as far as it will go.
NOTE
• For details on original size, refer to Original Size on page 5-19 .
• For details on original orientation, refer to Orig. Orientation (Original Orientation) on page
5-20 .
IMPORTANT
• Confirm that the original width guides exactly fit the originals. If there is a gap,
readjust the original width guides. The gap may cause the originals to jam.
• Ensure that loaded originals do not exceed the level indicator. Exceeding the
maximum level may cause the originals to jam.
• Originals with punched holes or perforated lines should be placed in such a way
that the holes or perforations will be scanned last (not first).
A3 A3 1
Original size
* When selecting the copying function