Olivetti d-COPIA 1801 MF, Руководство по эксплуатации

Страница: 51 / 215

2-23
Installing and Setting up the Machine > Setting Energy Saver Function
3
Press the [ ▲ ] or [ ▼ ] key to select [Timer Settings], and press the [ OK ] key.
4
Press the [ ▲ ] or [ ▼ ] key to select [Sleep Timer], and press the [ OK ] key.
2
Set the sleep time.
Use the numeric key or press the [ ▲ ] or [ ▼ ] key to enter the sleep time, and press the [ OK ]
key.
Power Off Timer
If the machine is not used while in sleep mode, the power automatically turns off. The Power Off Timer is used to set the
time until the power turns off. The factory setting for the time until the power turns off is 1 hour.
To change the preset power off time, refer to
Power Off Rule on page 7-12 and Power Off Timer on page 7-12 .
To use the Power Off Timer, configure the following settings:
• Power Off Rule (page 2-23)
• Power Off Timer (page 2-24)
Power Off Rule
Follow the steps below to set whether the power automatically turns off when not used.
1
Display the screen.
1
Press the [ Status/System Menu/Counter ] key.
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password on page 2-20 .
The factory default login user name and login password are set as shown below.
Common Settings
Timer Settings
2 1
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
Timer Settings
Sleep Timer
2 1
Sleep Timer
(1 - 60) 60 min.
2 1