Olivetti d-Copia 12, Руководство по обслуживанию

Страница: 21 / 78

Y101700-5 Service Manual 2-3
9) Shake the aluminum bag to stir developer.
10) Supply developer from the aluminum bag to the top of
the MX roller evenly.
Note: Be careful not to splash developer outside Develo-
per unit.
11) Attach Upper developer unit and fix it with a screw.
12) Rotate the MG roller gear to distribute developer evenly.
Note: Never rotate the gear in the reverse direction.
Note: When carrying Developer unit, do not tilt it extre-
mely as shown with the arrow in the figure below.
(Prevention of splash of developer)
13) Insert Developer unit carefully into the copier.
Note: Quick insertion may result in splash of developer. Be
sure to insert carefully.
14) Confirm that Developer unit is completely inserted to
the bottom of the machine, fix Developer unit and the
machine with a screw.
15) Completion of Developer unit installation.
2.7 Toner cartridge installation
1) To prevent against uneven distribution of toner, hold
Toner unit with both hands and shake it several times
horizontally.
2) Hold the section of Toner unit shown in the figure below,
remove the packing tape, and remove the cushion.
3) Pull out the cushion in the arrow direction.
4) Insert Toner unit carefully into the copier.
5) Insert until the hook is engaged with the copier as shown
in the figure below.