Olivetti d-color MF451 Скачать руководство пользователя страница 104

Страница: 104 / 321

Application

5-30

d-Color MF651/551/451

5.4

5.4.2

Edit Color

Neg./Pos. Reverse

Use this function to enable the original to be copied with the density and gradations of the image inversed.

The images in the original are copied and output reversed like negative film of photographs.

If a single color is selected, the images are reversed relative to the selected color.

If a background color is selected, colors are reversed relative to the selected base color and the color
of the images.

Press [Application]

[Edit Color]

[Neg./Pos. Reverse].

To cancel the Neg./Pos. Reverse function, press [Neg./Pos. Reverse] again.

Reference

To set Single Color:

Press [Basic]

[Color]

[Single Color].

To Set Background Color:

Press [Application]

[Edit Color]

[Background Color].

Содержание d-color MF451


































































































































































































































































































































Результаты поиска

Содержание d-color MF451

Отзывы:

Похожие инструкции для d-color MF451

Бренды по названию

Популярные бренды

Olivetti d-color MF451, Инструкция по эксплуатации

Результаты поиска

Содержание d-color MF451

Отзывы:

Похожие инструкции для d-color MF451

Бренды по названию

Популярные бренды