732-N Front Load Slicer
0732S20004
3-1
INSTALLATION INSTRUCTIONS
Slicer Installation:
Before starting the Installation process make sure you observe the following three
caution notes.
CAUTION
THE SLICER IS HEAVY, USE PROPER TECHNIQUE WHEN LIFTING.
KEEP BACK STRAIGHT, KNEES BENT, AND LIFT WITH LEGS.
USE GLOVES TO PROTECT HANDS.
CAUTION
NEVER LIFT THE SLICER BY ITS SIDE COVERS.
CAUTION
BEFORE PLACING THE SLICER ON THE TABLE OR COUNTER MAKE SURE THAT
IT CAN SUPPORT THE SLICER’S WEIGHT WHICH IS APPROX. 250 POUNDS.
Select a location for your slicer which has a substantial mounting surface, (see the
caution note above), and which has electrical service compatible with the load the
machine will place on it as indicated on the electrical data plate of the machine.
Position the machine while it is still in its packaging as close as possible to the desired
end location. Expose the machine by removing the outer packaging and remove its
crumb tray. Using at least two people, (one in the front and one at the back of the
machine), lift the slicer from the resting surface of the packaging and set the machine
onto the counter or table as close as possible to the desired end location. Make final
location adjustments by sliding the machine to its desired location.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor