Oliver 619-16A, Руководство пользователя по эксплуатации и инструкция

Страница: 9 / 38

0619S20048 3-1
OPERATING INSTRUCTIONS
Before You Start
CAUTION
THE DIVIDER SHOULD ONLY BE PLUGGED INTO AN OUTLET
WITH THE SAME VOLTAGE AS STATED ON THE NAMEPLATE
Before starting a new divider with
THREE PHASE electrical power for the first time you
should check to see if the motor is running in the correct direction. Remove the front
cover by removing the four thumbscrews which secure it; you will also have to remove
the handle from the directional control lever before removing the front cover. Once the
cover has been removed you should be able to see the fan end of the motor on your
divider, this fan
MUST rotate in a clockwise direction.
CAUTION
EXTENDED RUNNING OF A DIVIDER WITH THE MOTOR ROTATING
IN THE INCORRECT DIRECTION WILL SEVERELY DAMAGE THE
HYDRAULIC PUMP OF YOUR DIVIDER.
If the motor is rotating in the incorrect direction turn the machine off, disconnect it from
the power supply and have a qualified electrician reverse two of the three power wires in
the plug at the end of the power cord.
DO NOT move the ground, (green), wire.
WARNING
ALWAYS HAVE ELECTRICAL WORK DONE BY QUALIFIED ELECTRICIANS.
Recheck the divider making sure that it is now running in the correct direction, (clockwise
looking at the fan end of the motor).
CAUTION
MOTOR ROTATION SHOULD BE CHECKED EVEN IF THE
DIVIDER IS ONLY MOVED TO A DIFFERENT POWER OUTLET
IN THE SAME ROOM
Basic Operation
•
Start by weighing out a piece of dough, which, when divided by the number of
compartments available on your divider, will provide you with the desired end weight.
For example: a thirty pound piece of dough after division on a twenty-four part
divider will yield twenty-four, twenty ounce pieces, perfect for molding into one and a
quarter pound loaves of bread.