Oliver 1808-D, Операции пользователя

Страница: 37 / 59

1808-D
1808S20060 10-1
TROUBLESHOOTING
WARNING
DISCONNECT FROM POWER BEFORE CLEANING OR SERVICING.
WARNING
SERIVCE ON THIS EQUIPMENT SHOULD ONLY BE PERFORMED BY A
QUALIFIED SERVICE TECHNICIAN.
Should you experience problems with your machine, refer to the Trouble
Shooting guide below. If you have attempted the remedies listed below and are
still experiencing problems, contact Oliver Packaging & Equipment Company
(USA)
1-800-253-3893
SYMPTOM CORRECTIVE ACTION
Poor seal quality Check to see that the heated roll switch is in the “I”
on position.
Check to see if the heat seal roll is dirty, if
so, clean as detailed in the “CLEANING
PROCEDURES”.
Check the fuses in the electrical enclosure to see if
any fuse is open (no continuity), if it is open,
replace it. (To be performed only by a Qualified
Service Technician)
Check to see if one or more of the heater elements
are burned out. There are four heater elements in
the heat seal roll. This check requires the use of an
amp meter to determine the condition of each
individual heater element. (To be performed only by
a Qualified Service Technician)
Check to see if heat seal roll is up to temperature.
Compare set temp and actual on digital
temperature control on side of electrical enclosure.
Continued