Oliver 1808-D, Операции пользователя

Страница: 25 / 59

1808-D
1808S20057 7-5
Step 2. Remove the cutter assembly from the machine as shown in the photo below. Put the cutter in a
safe place to prevent injury to personnel and to protect the cutter from damage.
Step 3. Replace the existing set of tray carriers with the new set of tray carriers.
Continued

Hold the blade holder
Caution:
The blades are sharp
 Remove the side plate
opposite the sprocket
side Note: How the
bushing is pressed in the
plate
 Lift the cutter blade
assembly out of the
machine
Caution: The blades
are sharp
CUT-OUT IN
SIDE FRAME