Oliver 1808-D, Операции пользователя

Страница: 39 / 59

1808-D
1808S20060 10-3
Film does not cut Check to see if a cutter blade is missing.
Check to see if cutter blade is dull
Replace as necessary!
Film is not centered on tray
Check to see if film roll is centered on the machine.
If not, center the roll as explained in the
“OPERATING THE MACHINE” section of this
manual.
Machine does not run Make certain the machine is plugged into an
adequately rated electrical outlet.
Verify that there is power at the electrical outlet.
Check the E-stop button – must be in released
position.
Check that Infeed gate is in place.
Check that Discharge cover is closed.
Check to see if heated roll is in sealing position
(down).
Check the fuses in the electrical enclosure to see if
any fuse is open (no continuity), if it is open,
replace it. (To be performed only by a Qualified
Service Technician)
Check the circuit breaker in the electrical enclosure
to see if it has tripped. If tripped, investigate cause
and reset. (To be performed only by a Qualified
Service Technician)