Oleo-Mac 937 Скачать руководство пользователя страница 19

19

21

22

23

Deutsch

Español

Nederlands

ANLASSEN

PUESTA EN MARCHA

STARTEN

TREIBSTOFF
Dieses Gerät wird von einem 2-Takt-Motor angetrieben, der die 

Vormischung von Benzin und Öl für 2-Takt-Motoren erfordert. 

Bleifreies Benzin und Öl für 2-Takt-Motoren in einem sauberen, für 

Motor zugelassenen Behälter vormischen (Abb.17). 

EMPFOHLENER TREIBSTOFF: DIESER MOTOR IST FÜR DEN BETRIEB 

MIT BLEIFREIEM BENZIN FÜR FAHRZEUGE MIT OKTANZAHL 89 ([R + 

M] / 2) ODER HÖHER ZERTIFIZIERT (Abb.18).

Mischen Sie das Öl für 2-Takt-Motoren gemäß den Anleitungen auf 

der Packung mit Benzin.

Wir empfehlen die Verwendung von Öl für 2-Takt-Motoren Oleo-

Mac  2% (1:50), das speziell für alle luftgekühlten 2-Takt-Motoren 

Oleo-Mac ausgelegt ist.

Das im Prospekt (Abb.19) angegebene korrekte Öl-/Treibstoff-

Mischverhältnis gilt sowohl bei der Verwendung von Oleo-Mac 

PROSINT 2 und EUROSINT 2 (Abb.20) als auch eines gleichwertigen 

Motoröls hoher Qualität (Spezifikationen JASO FD oder ISO 

L-EGD

). Wenn die Spezifikationen des Öls NICHT gleichwertig oder 

nicht bekannt sind, ein Öl-/Treibstoff-Mischverhältnis von 4% (1:25) 

verwenden.

WARNUNG: KEIN ÖL FÜR FAHRZEUGE ODER ÖL FÜR 
2-TAKT-AUSSENBORDMOTOREN VERWENDEN

WARNUNG: Auf keinen Fall Treibstoff mit einem höheren 
Alkoholanteil als 10% verwenden; Gasohol mit einem 
Akoholanteil bis 10% oder Treibstoff E10 sind akzeptabel.

WARNUNG:

 Nur so viel Treibstoff beschaffen, der für den eigenen 

Bedarf notwendig ist; kaufen Sie niemals mehr 
Treibstoff, als Sie in ein, zwei Monaten verbrauchen,
Lagern Sie das Benzin in einem gut verschlossenen 

Behälter an einem kühlen, trockenen Ort

HINWEIS:

 Das Öl für 2-Takt-Motoren enthält Kraftstoffstabilisator 

und bleibt 30 Tage lang frisch. Mischen Sie KEINE höheren Mengen 

als Sie innerhalb 30 Tagen verbrauchen können. Wir empfehlen Öl 

für 2-Takt-Motoren mit Kraftstoffstabilisator (Emak ADDITIX 2000 - 

Art. Nr. 001000972 – Abb.21

).

AUFTANKEN (Abb.23)
Schütteln Sie den Gemischkanister vor dem Auftanken (Abb.22).

COMBUSTIBLE

Este producto se acciona con un motor de 2 tiempos y requiere 

la premezcla de gasolina con aceite para motores de 2 tiempos. 

Premezclar la gasolina sin plomo con el aceite para motores de dos 

tiempos en un recipiente limpio aprobado para la gasolina (Fig.17). 

COMBUSTIBLE ACONSEJADO: ESTE MOTOR ESTÁ CERTIFICADO 

PARA FUNCIONAR CON GASOLINA SIN PLOMO PARA USO 

AUTOMOVILÍSTICO CON 89 OCTANOS ([R + M] / 2) O CON UN 

NÚMERO MAYOR DE OCTANOS (Fig.18).

Mezclar el aceite para motores de 2 tiempos con la gasolina 

siguiendo las instrucciones del envase.

Recomendamos utilizar aceite para motores de 2 tiempos Oleo-Mac 

al 2% (1:50), formulado específicamente para todos los motores de 

dos tiempos enfriados por aire Oleo-Mac.

Las proporciones correctas de aceite y combustible indicadas en 

el prospecto (Fig.19) son adecuadas cuando se utiliza aceite para 

motores Oleo-Mac PROSINT 2 y EUROSINT 2 (Fig.20) o un aceite 

para motor de alta calidad equivalente (especificaciones JASO 

FD o ISO L-EGD). Si las especificaciones del aceite no se conocen 

o  NO son equivalentes, utilizar una relación de mezcla aceite/

combustible del 4% (1:25).

PRECAUCIÓN: NO UTILIZAR ACEITE PARA VEHÍCULOS O 

ACEITE PARA MOTORES FUERA DE BORDA DE 2 TIEMPOS.

PRECAUCIÓN: no utilizar combustibles con porcentajes de 

alcohol superiores al 10%; se admite el uso de gasohol con 

un porcentaje de alcohol de hasta el 10% o combustible 

E10.

PRECAUCIÓN:

Comprar sólo la cantidad de combustible necesaria en 

base al consumo; no comprar más de lo que se utilizará 

en uno o dos meses;

Conservar la gasolina en un recipiente cerrado 

herméticamente, en un lugar fresco y seco.

NOTA: el aceite para motores de dos tiempos contiene estabilizador 

para combustible y permanece fresco durante 30 días. NO mezclar 

más cantidad de la que se va a utilizar en 30 días. Se recomienda 

utilizar aceite para motores de 2 tiempos con estabilizador para 

combustible (Emak ADDITIX 2000 - cód. art. 001000972 – Fig.21).

LLENADO (Fig.23)

Agitar el bidón de la mezcla antes del llenado (Fig.22).

BRANDSTOF

Dit product wordt aangedreven door een tweetaktmotor waarbij 

er een voormenging moet plaatsvinden van olie en benzine voor 

tweetaktmotoren. Meng de loodvrije benzine en de olie voor 

tweetaktmotoren voor in een schone houder die goedgekeurd is 

voor benzine (Fig.17). 

AANBEVOLEN BRANDSTOF: DEZE MOTOR IS GECERTIFICEERD OM 

TE WERKEN MET LOODVRIJE BENZINE VOOR AUTOGEBRUIK MET 89 

OCTAAN ([R + M] / 2) OF MET EEN GROTER OCTAANGETAL (Fig.18).

Meng de olie voor tweetaktmotoren met benzine volgens de 

instructies op de verpakking.

Wij adviseren om Oleo-Mac olie voor tweetaktmotoren op 2% 

(1:50) te gebruiken, die specifiek is samengesteld voor alle 

luchtgekoelde Oleo-Mac tweetaktmotoren.

De juiste olie-/benzineverhoudingen die aangegeven zijn in de 

tabel (Fig.19) zijn geschikt als men Oleo-Mac PROSINT 2- en 

EUROSINT 2-olie (Fig.20) gebruikt of een soortgelijke motorolie 

van hoge kwaliteit (JASO FD- of ISO L-EGD-specificaties). Als 

de specificaties van de olie NIET equivalent of niet bekend zijn, 

gebruik dan een mengverhouding olie/benzine van 4% (1:25).

LET OP: GEBRUIK GEEN OLIE VOOR AUTO'S OF OLIE VOOR 

TWEETAKT-BUITENBOORDMOTOREN.

L E T   O P:   g e b r u i k   n o o i t   b ra n d s t o f fe n   m e t   e e n 

alcoholpercentage van meer dan 10%; acceptabel zijn 

gasohol met een alcoholpercentage tot 10% of E10-

benzine.

VOORZICHTIG:

Koop alleen de hoeveelheid brandstof die u nodig 

heeft; koop niet meer dan dat u in één of twee maanden 

gebruikt;

Bewaar de benzine in een hermetisch gesloten tank op 

een koele en droge plaats.

OPMERKING: de olie voor tweetaktmotoren bevat een stabilisator 

voor benzine en blijft 30 dagen goed. Meng GEEN grotere 

hoeveelheden dan dat u in een periode van 30 dagen gebruikt. Wij 

adviseren olie voor tweetaktmotoren met stabilisator voor benzine 

(Emak ADDITIX 2000 - cod. art. 001000972 – Fig.21).

BIJVULLEN (Fig.23)

Schud de jerrycan met het mengsel voordat u de tank bijvult 

(Fig.22).

Содержание 937





























































Отзывы: