Oleo-Mac 937 Скачать руководство пользователя страница 11

11

Size 41    p.n. 001000975B
Size 42    p.n. 001000976B
Size 43    p.n. 001000977B
Size 44    p.n. 001000978B
Size 45    p.n. 001000979B

5

Size 41    p.n. 001001079A
Size 42    p.n. 001001080A
Size 43    p.n. 001001081A
Size 44    p.n. 001001082A
Size 45    p.n. 001001083A

4

Size M  p.n. 3155005
Size M  p.n. 3155006
Size L 

p.n. 3155007

Size XL  p.n. 3155008
Size XXL  p.n. 3155009

6

Deutsch

Español

Nederlands

SICHERHEITS-/SCHUTZKLEIDUNG

INDUMENTOS DE SEGURIDAD

BESCHERMENDE VEILIGHEIDSKLEDING

Die meisten Unfällen mit Kettensägen geschehen, weil der 
Bediener von der Kette getroffen wird. Bei der Arbeit mit der 
Kettensäge muss der Bediener daher immer die 
zugelassene Sicherheits-/Schutzkleidung tragen.
 Durch 
die Benutzung der Schutzkleidung wird die Verletzungsgefahr 
zwar nicht beseitigt, aber die Auswirkungen des Schadens im 
Falle eines Unfalls reduziert. Ihr Fachhändler berät Sie gern 
bei der Wahl der richtigen Schutzkleidung.

Die Kleidung muss geeignet sein und darf die Arbeit nicht 
behindern. Tragen Sie anliegende Schnittschutzkleidung. 
Die Jacke (Abb.1), die Latzhose (Abb.2) und die 
Schnittschutzgamaschen von Oleo-Mac sind ideal
. Tragen Sie 
keine Kleider, Schals, Krawatten oder Schmuckstücke, die sich im 
Holz oder im Gestrüpp verfangen könnten. Binden Sie langes Haar 
zusammen und schützen Sie es (zum Beispiel mit einem Schal, 
einer Mütze, einem Helm usw.).

Tragen Sie Sicherheitsschuhe oder -stiefel mit rutschfesten 
Sohlen und Stahlkappen (Abb.4-5).

Setzen Sie an Orten, an denen Gegenstände herunterfallen 
können, den Schutzhelm (Abb. 3A) auf.

Benutzen Sie die Schutzbrille oder das Schutzvisier!

Benutzen Sie einen Gehörschutz; zum Beispiel den 
Gehörschutz mit Bügel (Abb.3B) oder die Gehörschutzstöpsel.
 
Die Verwendung eines Gehörschutzes erfordert erhöhte 
Aufmerksamkeit und Vorsicht, denn die Wahrnehmung akustischer 
Warnsignale (Rufe, Alarme usw.) wird dadurch eingeschränkt.

Tragen Sie Schnittschutzhandschuhe (Abb.6) 

Oleo-Mac bietet ein komplettes Sortiment von 
Sicherheitsausrüstungen.

La mayoría de los accidentes con la motosierra se 
verifican cuando la cadena golpea al usuario. Para 
trabajar con la motosierra, colocarse siempre 
indumentos de seguridad homologados.
 El uso de 
elementos de seguridad no elimina los riesgos de 
lesiones pero reduce los daños en caso de accidente. 
Consultar con el vendedor de la máquina sobre los 
indumentos adecuados.

La ropa debe ser cumplir su función de protección y ser 
cómoda. Utilizar ropa adherente y a prueba de cortes. 
La chaqueta (Fig. 1), el peto (Fig. 2) y las polainas 
de protección Oleo-Mac son ideales.
 No llevar ropa, 
bufandas, corbatas o adornos que puedan ser atrapados 
por la madera o la maleza. Recogerse el cabello largo y 
cubrirse, por ejemplo con un pañuelo, una gorra o un 
casco.

Utilizar zapatos o botas de seguridad con suela 
antideslizante y punteras de acero (Fig. 4-5).

Colocarse el casco de protección (Fig. 3A) en los lugares 
donde puedan caer objetos.

¡Utilizar siempre las gafas o la visera de protección!

Emplear elementos de protección contra el ruido, como 
auriculares (Fig. 3B) o tapones.
 El uso de las protecciones 
para el oído exige mayor atención y prudencia porque 
se reduce la percepción de las señales sonoras de peligro 
(gritos, alarmas, etc.).

Colocarse guantes a prueba de cortes (Fig. 6). 

Oleo-Mac ofrece un equipamiento de seguridad 
completo.

De meeste ongevallen met de motorzaag doen zich 
voor wanneer de ketting de gebruiker raakt. Draag 
daarom bij het werken met de motorzaag altijd 
goedgekeurde beschermende veiligheidskleding.
 
Het gebruik van beschermende kleding vermindert 
niet de risico's voor letsel, maar beperkt wel de 
gevolgen van ongevallen. Vraag uw dealer om advies 
bij het kiezen van de juiste kleding.

De kleding moet goed zitten, en mag de bewegingen niet 
hinderen. Draag niet te wijde kleding die snijbestendig 
is. Het snijbestendige jack (Fig. 1), de broek (Fig. 2) en 
de beenbeschermingen van Oleo-Mac zijn hiervoor 
ideaal.
 Draag geen kleding, dassen, stropdassen of 
sieraden die in het hout of de takken verstrikt kunnen 
raken. Lang haar mag niet los gedragen worden, en moet 
worden beschermd (bijvoorbeeld met een hoofddoek, 
een muts, een helm, enz.).
Draag veiligheidsschoenen of -laarzen met 
antislipzolen en stalen punten (Fig. 4-5).
Draag de veiligheidshelm (Fig. 3A) 
op plaatsen waar 
voorwerpen van bovenaf kunnen vallen.
Draag een veiligheidsbril of een vizier!
Gebruik gehoorbeschermingen; bijvoorbeeld 
oorkappen (Fig. 3B) of oordoppen.
 Het gebruik van 
gehoorbeschermingen vereist grotere aandacht en 
voorzichtigheid, want geluidssignalen die op lawaai 
wijzen (schreeuwen, alarmen, enz.) worden minder goed 
gehoord.
Draag snijbestendige handschoenen (Fig. 6) 
Oleo-Mac biedt een complete veiligheidsuitrusting.

Содержание 937





























































Отзывы: