Oldham iTrans 2, Инструкция по установке и эксплуатации

Страница: 48 / 106

48
Set System Time – Hour
The system’s clock hour setting is
designated with an “h” in the status
bit and current value next to it. To
change the hour, press the “ ”
button during the 10 second
countdown. If you do not press “ ”
during the 10-second countdown,
the
will return to the Normal
Operating Mode. If you initiate the
hours option, the status bit will start
to flash and the
hour can be
changed by using the “↑” and “↓”
keys. When the desired value is
reached, press the “ ” key. If the
value is not saved before the time-
out, the will go back to the
Programming Mode.
Figure 5-20 Setting System Time (Hour)
Set System Time – Date
The system’s day of the month
setting is designated with a “d” in
the status bit and current value next
to it. To change the day, press the
“ ” button during the 10-second
countdown. If you do not press “ ”
during the 10-second countdown,
the
will return to the Normal
Operating Mode. If you initiate the
days option, the status bit will start
to flash and the
day can be
changed by using the “↑” and “↓”
keys. When the desired value is
reached, press the “ ” key. If the
value is not saved before the time-
out, the will go back to the
Programming Mode.
Figure 5-21 Setting System Date
Set System Time – Month
The system’s month setting is designated with an “E” in the status bit and
current value next to it. To change the month, press the “ ” button during
the 10-second countdown. If you do not press “ ” during the 10-second
countdown, the
will return to the Normal Operating Mode.