Oktober 7, Руководство по эксплуатации

Страница: 2 / 22

SET-UP
Check out the how-to videos on our website!
To remove your seamer from its box, lift as shown below. It is heavy (~45lbs) so
use caution while lifting.
Locate your seamer on a flat, level tabletop or bar-height surface. Make sure
there is enough room around the seamer to move around it easily.
Attach the lever arms (located in the accessories box that comes with the seamer)
by threading them into the holes located on the roller housings.
!ATTENTION!
Make sure the locking spring washer (wavy washer) is between the handle and
the roller housing and tighten it securely. If the handle’s threads loosen they
will bend or break over time.
!ATTENTION! Canning is done in a wet environment, so always plug the
seamer into a GFCI outlet to avoid shocking hazards.
The power cable is located “under” the seamer inside a 2in opening in the base
plate.
-------------------------------------------------------------------------------------------------------------