OKM Hermes, Руководство пользователя, Страница: 24 / 140

Hermes Robot User Manual
2 Document Version V3.0(01-11-2023)
shall observe the following safety rules:
 Use the robot and its component products in an environment that
meets the design specifications, otherwise the robot may fail.
 Please use the robot within the specified operation environment. If it is
used beyond its specifications and load conditions, the service life of
the robot would be shortened or the robot would even be damaged.
 Users should ensure that the robot operates under safety conditions.
There should be no objects around the robot, which may cause damage
to it. As the robot may be scratched and bumped due to the motion of
its movable mechanical parts, users should carry out risk assessment of
the operation environment on site and set up special facilities for
protection.

To prevent personnel from entering the motion area of the robot by
mistake, be sure to install a safety fence to stop personnel from
entering the dangerous area.

When the ambient temperature is close to 0℃, operate the robot at the
speed of 10% or less for more than 10 minutes to preheat it; perform
other operations after preheating the robot.

Detergents with strong corrosion are not suitable for cleaning the robot.
Anodized parts should not be cleaned by immersion.