Oki Pro1040, Руководство по обслуживанию

Страница: 103 / 118

- 103 -
Specifications
Consumables and maintenance
parts
Consumables: Print cartridge, belt unit (3-piece set of belt, waste toner box,
and 2nd transfer roller), waste toner box, fuser and exit unit
Maintenance products: Cutter unit, F0 roller unit, paper guide, feed unit
Operating sound
(noise level)
When operating 57 dBA (Reference value)
In standby ≤ 37 dBA (Reference value)
Power save mode Background level (Reference value)
Service life of equipment 5 years or 6,000,000 printings
*3
Storage environment Temperature: -10 to 43 °C
Relative humidity: 10 to 90%
*1: Pro1050 only.
*2: Not including correction operations.
*3: Equipment service life varies depending on your operating environment. In addition, to maintain the device's service life of
6,000,000 sheets (A6 size equivalent), you may need to have parts replaced with designated parts (paid) by maintenance
engineers.
*4: [Recommended media] Die-cut labels on high-quality paper (55PW8K Blue/4 x 6 inch/produced by Lintec)
When using black mark sensor: Black mark and liner are the same width
When using gap sensor: No black marks
[Black mark and gap sensor position] 53 mm
[Adjustments before printing]: According to User’s Guide
[Points to measure] The first approximately 20 sheets that are printed are outside specifications (test printing).
When using black marks
Measure from the leading edge of the black mark to the position that printing starts at the point that the paper is
detected by the black mark sensor.
When using a gap sensor
Measure from the leading edge of the label to the position that printing starts at the point that the paper is detected
by the gap sensor.
*5: [Recommended media] Die-cut labels on high-quality paper (55PW8K Blue/4 x 6 inch/produced by Lintec)