Oki OKIFAX F-305 Скачать руководство пользователя страница 143

Страница: 143 / 188

10-3

SER SETTINGS

SER

SETTINGS

05.Energy Save

Mode

Set the machine to conserve power when not in use.

The machine saves power consumption after the speciﬁed idle
time elapses.

Off

Cancel the energy save mode.

NOTE

• The idle time can be changed in the “Initial setting” mode (see pages 1-12 to

1-14.)

• While the machine is in the energy save mode, the machine shows “Energy

Save Mode” on the LCD, but all the lights on the control panel and scanner
lamp will not be off.

06.Fax & Copy

Make a copy of your document each time it is transmitted. (See page 4-18.)

07.Primary Mode

The machine returns to the primary mode when the standby status continues
for longer than 3 minutes after ﬁnishing the sending or printing jobs. With this
setting, the machine always starts up in the primary mode.
In default settings, the

copy mode

is set for the primary mode. However, you

can change the primary mode to the

fax mode

or to the

scan mode

08.Service Mode

For technical support. Do NOT turn this setting to “On” without an author-
ized technician’s advice.

09.Date & Time

Enter the current date and time using 24-hour format.

10.Paper Source

Set the usage rules for the paper cassettes and bypass tray.

Cassette1

You can choose one of the following for cassette 1.

Fax/Copy

It is used for fax printing, list printing and copying.

Not Used

Cassette 1 is not used for faxing and copying.
It can be used for the separator page function (page
5-14) or PC printing.

Fax

It is used only for fax printing and list printing.

Copy

It is used only for copying.

Cassette2

You can choose one of the following for cassette 2.

Fax/Copy

It is used for fax printing, list printing and copying.

Not Used

Cassette 2 is not used for faxing and copying.
It can be used for the separator page function (page
5-14) or PC printing.

Fax

It is used only for fax printing and list printing.

Copy

It is used only for copying.

Bypass tray

You can choose one of the following for Bypass tray.

Fax/Copy

It is used for fax printing, list printing and copying.

Not Used

Bypass tray is not used for faxing and copying.
It can be used for the separator page function (page
5-14) or PC printing.

Fax

It is used only for fax printing and list printing.

Copy

It is used only for copying.

NOTE

• The “Cassette2” appears only when the optional second cassette has been

installed.

• For details of PC printing, refer to the PDF manual on the GDI Printer / Scan-

ner Driver CD supplied with the machine.

11.Page Counter

You can conﬁrm the total number of printed and scanned page.
(See page 8-8.)

Содержание OKIFAX F-305





























































































































































































Результаты поиска

Содержание OKIFAX F-305

Отзывы:

Oki OKIFAX F-305, Руководство пользователя, Страница: 143 / 188

Результаты поиска

Содержание OKIFAX F-305

Отзывы: