manualshive.com logo in svg

Oki OKIFAX 5950, Руководство по обслуживанию

Поделиться
Скачать
Oki OKIFAX 5950 Скачать руководство пользователя страница 509

DESCRIPTION OF

PRINT OPERATIONS

OF5750/5950 Series    January 2001

B - 17

B.3.3.1

Toner Low Detection

• Composition

The device consists of the stirring gear which rotates at a constant rate, the stirring bar and
the magnet on the stirring bar.  The stirring bar rotates through the link on the protrusion in
the stirring gear.

The configuration of stirring bar in the figure below may differ.  The principle of toner detec-
tion, however, remains the same.

• Operation

Toner Low is detected by monitoring the time interval between the encounter of the magnet
set on the sensor lever and the magnet on the stirring bar.

Operation during toner full state
• The stirring bar rotates due to interlocking with

the stirring gear.

• Even when the magnet on the stirring bar

reaches the maximum height, since the other
side is being dipped in the toner, the stirring bar
is pushed by the stirring gear.

Operation during toner low state
• When the stirring bar reaches the maximum

height, since there is no resnstance provided by
the toner on the other side, it falls to the mini-
mum height due to its own weight.  Because of
this, the time interval during which it is in en-
counter with the magnet of the sensor lever
becomes long.  By monitoring this time interval,
toner low can be detected.

Magnet

Protrusion

Stirring Bar

Stirring Gear

Stirring Bar

Stirring Gear Section

Sensor 
Lever

Toner Sensor

Sensor 
Lever

Stirring Bar

Содержание OKIFAX 5950










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды