manualshive.com logo in svg

Oki OKIFAX 5950, Руководство по обслуживанию

Поделиться
Скачать
Oki OKIFAX 5950 Скачать руководство пользователя страница 146

OF5750/5950 Series    January 2001

2 - 39

2.9.2.3

Technical Functions (Setup)

• Table 2.9.2.3 shows the initial setting items and their purpose. (The default setting is different

by the individual countries.)

• Each item can be accessed by entering it on Technical Setup.
• The detailed procedures of the initial settings items will be explained on the following tables.

The setting data must be transferred to the G3 Option side.
(encluding LLC CHECK, G3/G4 LEARNING, GATEWAY SERVICE, EMAIL MAINTENANCE,
ADMIN EMAIL ADDR. and COMMAND T.O.)

Table 2.9.2.3  Technical Functions:  Setup (1/11)

   No.

Item

Specifications

01

Service Bit

02

Monitor Cont.

03

Country Code

Enables the serviceman to make special settings.
If this setting is OFF, some settings and report print function
may become unavailable.

1) Setting values

ON: Enables the serviceman to make settings.
OFF: Disables the serviceman to make settings.

Sets up the line monitor.
If this setting is OFF at the time of transmission, the line is
monitored during dialing but the line will not be monitored after
a specified time lapse (about 5 sec).
If this setting is ON, the line will be monitored till the end of
communication.
G3 option line can be monitored.

1) Setting values

ON (Monitored continuously)/OFF (Not monitored continu-
ously)
* The tone level can be adjusted by setting Monitor Volume.

Set a country code.

1) Setting values

Select a country code from:
USA/INT’L/GBR/IRL/NOR/SWE/FN/DEN/GER/HUN/TCH/
POL/SUI/AUT/BEL/HOL/FRE/POR/ESP/ITA/GRE/AUS/NZL/
SIN/HNG/LTA/MEX/RUS

Determine whether the date and time set on the local machine
are to be printed at the beginning of the received image.

1) Setting values

OFF (Not printed)/ONCE (Printed on page 1 only)/ALL
(Printed on all pages)

04

Time Date Print

Содержание OKIFAX 5950










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды