manualshive.com logo in svg

Oki OKIFAX 5950, Руководство по обслуживанию

Поделиться
Скачать
Oki OKIFAX 5950 Скачать руководство пользователя страница 184

OF5750/5950 Series    January 2001

2 - 77

   No.

Item

Specifications

Table 2.9.5.2  ID/Password Prg. (2/4)

4) Relay Broadcast

Box for relay broadcasting.
Handles Personal Box number as the relay group number.
Register password and the group address (relay broadcast
address) when opening the relay broadcast box.
Password:  Fixed to 4 digits (0 to 9 only)
Group address:  Specification by Speed Dial enabled (Dis-
cretely not allowed)
Registration by Group Dial enabled.
Whole Speed Dial may be registered as one group for
maximum.
Speed Dial to which Email address is registered may be
specified.
(However, no mixing of Email address and PSTN/ISDN TEL
No. is allowed within one group.)
In addition, registration operation for Speed Dial/Personal
Box in use before the distribution is completed is inhibited.

*

When RELAY BROADCAST = OFF, opening Relay Broad-
cast Box is inhibited.

*

Box is not cleared if RELAY BROADCAST = OFF with Relay
Broadcast Box already opened.

*

If all addresses are erased from open Relay Broadcast Box,
the box will be closed.

*

In the case of OKIFAX 5750 device, setting is skipped. (Only
OKIFAX 5950 is operable.)

*

Use SEP/SUB frames respectively for board transmission or
confidential reception.

*

Conventional polling (S bit) and confidential (NSS) are
inherited to retain communicability with the existing ma-
chines.

*

Use SID and SUB frames for Relay Broadcast.

*

Relay broadcast by NSS is enabled.  Communicability with
the existing machines will be retained.  (Continued to
sts1225)

Set the password for using the Auto Answer Mode (MEM.:
Memory only reception mode).  Persons who do not know the
password cannot make changes or print memory data in the
Auto Answer Mode (MEM. mode).
*

This setting is disabled when Auto Answer Mode is set to
MEM.

1) Number of Mem. passwords that can be registered

OKIFAX5750/5950:  1

2) Number of characters used to specify a Mem. password

4 characters (digits only)

3) Password check

The entered password cannot be checked on the machine.
However, it can be checked using RMCS.

05

Mem. Password

Содержание OKIFAX 5950










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды