manualshive.com logo in svg

Oki OKIFAX 5950, Руководство по обслуживанию

Поделиться
Скачать
Oki OKIFAX 5950 Скачать руководство пользователя страница 147

OF5750/5950 Series    January 2001

2 - 40

06

TAD Mode

05

TSI Print

   No.

Item

Specifications

Table 2.9.2.3  Technical Functions:  Setup (2/11)

Determine whether a TSI is to be printed in the received image.

 1) Setting value

ON (Printed)/OFF (Not printed)

* When this setting is ON and TIME/DATE PRINT is set to

ALL , a TSI is printed on all received pages.  In other cases,
a TSI is printed on the first page only.

* When a TSI has not been registered but a personal ID has

been registered, the personal ID is printed.

Switches between TAD modes.
This setting is required to determine whether TAD is to be
selected in the AUTO ANSWER mode and set the fax operation
to be performed after completion of TAD-side operation (re-
sponse).

In the TAD mode, a message is recorded in the telephone
memory if the telephone (connected externally) answers auto-
matically when the facsimile is ready for reception.  After
completion of message recording, the line is switched to the
facsimile.
If CNG is detected while the telephone is answering automati-
cally, reception starts immediately.

1) Setting values

OFF/TYPE1/TYPE2/TYPE3 selectable

* Relationships between settings and operations are as

follows:
OFF:

TAD cannot be selected in the AUTO ANSWER
mode.

TYPE1: When TAD operation ends without detecting

CNG, the line is switched to the facsimile starting
reception immediately.

TYPE2: After completion of TAD operation, the machine

returns to the standby state.

TYPE3: The machine starts detecting CNG 15 seconds

after the telephone starts the auto answering
operation.

If TAD operation ends without detecting CNG, the machine

returns to the standby state.

* When this setting is set to OFF in the TAD mode, the FAX

mode will be selected automatically.

Содержание OKIFAX 5950










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды