manualshive.com logo in svg

Oki OKIFAX 5950, Руководство по обслуживанию

Поделиться
Скачать
Oki OKIFAX 5950 Скачать руководство пользователя страница 196

OF5750/5950 Series    January 2001

2 - 89

   No.

Item

Specifications

18

Instant Dial

19

Restrict Access

20

ECM Function

17

Mem. Full Save

Table 2.9.5.3  Machine Settings (3/6)

When the memory becomes full during read, the operator must
determine whether the read pages are to be saved or canceled.
Determine whether the read pages are to be saved or canceled
automatically if the operator forget to save/cancel them and
therefore an operation T.O. results.

1) Setting values

ON (Saved)/OFF (Canceled)

ON: The page being read is discarded and the previously

read pages are saved (or transmitted if transmission
preparation is specified).

OFF: All pages are discarded including the page being read.

Determine whether instant dialing transmission is to be per-
formed.
If the remaining memory capacity is not satisfied the instant dial
start condition although this setting is ON, the feeder transmis-
sion is performed.  When this setting is OFF, the feeder trans-
mission is uniformly performed.

1) Setting values

ON (Instant dialing transmission is performed)/OFF (Instant
dialing transmission is not performed)

Determine whether operation is to be restricted.
When ON is selected, persons who do not know the password
cannot operate the machine.
When ON is selected, the standby screen requires the operator
to enter the password.  Operation is restricted until a valid
password is entered.

1) Setting values

ON (Operation is restricted)/OFF (Operation is not restricted)

ON: The ID/Password Prg. allows a restrict ID to be regis-

tered.  Operation is restricted only when this setting is
ON and a restrict ID has already been registered.

OFF: The ID/Password Prg. disables registration of a restrict

ID.  When this setting is OFF, operation is not re-
stricted irrespective of whether a restrict ID has been
registered.

Determine whether ECM transmission is to be performed.

1) Setting values

ON (ECM transmission performed)/OFF (ECM transmission
not performed)

Содержание OKIFAX 5950










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды