manualshive.com logo in svg

Oki OKIFAX 5950, Руководство по обслуживанию

Поделиться
Скачать
Oki OKIFAX 5950 Скачать руководство пользователя страница 28

OF5750/5950 Series    January 2001

1 - 19

No.

Item

Specifications

• Installing the NIC card for OKIFAX 5750/5950

provides Network print service as an option.

1) Network 3.1x, 4.1x
2) TCP/IP
3) Windows NT/95/98/3.1
4) T600dpi, 10 ppm
Note: For details, see Product Spec. “Network Print

Service”

This function can be used when Option LAN board is
installed.
E-mail base (ITU-T T.37 simple mode) Internet-Fax
uses a internet mail protocol the same as general mail
client.
- Internet-Fax convertes a scanning data to Tiff-f

(Tagged Image File Format) and send it by using
SMTP (Simple Mail Transmit Protocol) Protocol via
JCI-NIC.

- Internet-Fax accesses the Mail server in the interval

by using POP3 (Post Office Protocol version 3)
Protocol via JCI-NIC and get a E-mail with Tiff-file.
(Interval time: 0 - 60 min.)

The following functions are supported:
• I-Fax Sending
• I-Fax Receiving
• Gateway Service 1
• Gateway Service 2
• I-Fax Service
Note: For details, see Product Spec. “ Internet Fax

Kit”.

The follwing four modes are supported.
1) G4 function
2) ISDN G4 communication
3) ISDN G3 communication
4) ISDN Report and List
Note: For details, see Product Spec. “ISDN G4 option

system specifications”.

This function enables the sumltaneous use of G4 and
G3 protocols.
Note: For details, see Product Spec. “ Dual Mode

Communications”

Both 1st line and 2nd line (Dual line) can be connected
to a same network type(PSTN/PBX).  Communication
for G3 Dual Line is enabled only memory TX/RX.
Note 1: When the G3A option board is installed, other

option board (G4A/JCI NIC board) cannot be
used.

Note:

For details, see Product Spec. “G3 Dual Line
Function”.

38

Internet FAX Kit: E-mail type
(option)

39

ISDN G4 (option)

40

Dual Mode Communication
(option)

41

G3 Dual Line Function (option)

Содержание OKIFAX 5950










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды