manualshive.com logo in svg

Oki OKIFAX 5950, Руководство по обслуживанию

Поделиться
Скачать
Oki OKIFAX 5950 Скачать руководство пользователя страница 365

OF5750/5950 Series    January 2001

7 - 24

Start

No

Are the document guides set to meet the 

document width?

Are the documents straightly loaded along 

the guides?

The documents have 

the same width?

1. Set the guides to meet the
    document width.
2. Load the documents
    straight along the guides.

No

No

Yes

A

< 0.08 to 0.13 mm (Multiple doc.)?
< 0.06 to 0.15 mm (Single doc.)?

Load documents by meeting
the same width.

Check points:
1. Adhesive such as paste, tape, etc. on the
    surface of the documents?
2. The leading edges of the documents are
     rugged due to paste, etc.?

Yes

The thickness of the document:

The documents are

normal?

The control panel unit is closed firmly?

Are there obstacles such as pieces of

paper in the document-passing slot?

Use the carrier sheet.

Use documents of the left
specification.

Close the control panel unit.

Remove the obstacles.

Replace the rugged parts.

Is the document-passing slot rugged

due to flaws, etc.?

Yes

No

No

Yes (Normal)

Yes

No

No

Yes

Yes

7.20 Document Skew

Содержание OKIFAX 5950










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды