CX2032 MFP User’s Guide
Configuring your machine
28
Network set up
The MFP must also be set up properly on your network to perform scan
to e-mail and scan to FTP functions. In order for other network devices
to find the MFP on the network, the following network parameters have
to be set.
1.
DHCP enable:
2.
IP Address: . . .
3.
Subnet mask:. . .
4.
Gateway IP:. . .
5.
DNS server:. . .
6.
SMTP server:. . .
7.
SMTP port:25
8.
POP3 server: . . .
9.
POP3 Port:110
Explanation:
1.
DHCP Enable:
Choose Yes to obtain IP/subnet/gateway addresses automatically
from DHCP server. After changing setting from Disable to Enable,
switch scanner module power OFF then ON.
2.
IP Address:
The Internet Protocol (IP) address assigned to your machine by
your network administrator.
3.
Subnet Mask:
The net mask address assigned by your network administrator.
4.
Gateway IP:
The gateway IP address assigned by your network administrator.
