OK International CW1-RC Series, Руководство по эксплуатации

Страница: 31 / 38

CW-1RC SERIES CHECKWEIGHER
31
7.2 Frequency Drive Settings
7.2a Standard Drive Parameters
There are two drives that control the case transport roller conveyors. See tables below for
recommended drive settings. Only settings that vary from drive default settings are shown.
For specific information regarding programming of the PowerFlex4M frequency drive refer
to the manufactures’ operation manual, www.rockwellautomation.com / Publication 22F-
UM001C-EN-E
Drive 1 [Scale Conveyor]
No. Parameter
Parameter Value
Default Set
P101 Motor NP Volts 480 380
P102 Motor NP Hertz 60 50
P103 Overload 0.9 0.9
P105 Maximum Frequency 60 80
P106 Start Source 1 1 2
P108 Speed Reference 1 1 4
P109 Acceleration Time 10 0.5
P110 Deceleration Time 10 0.5
A410 Preset Frequency 0 0 50
A451 Auto Restart Tries 0 9
A452 Auto Restart Delay 1 0
Drive 2 [Outfeed Case Transport]
No. Parameter
Parameter Value
Default Set
P101 Motor NP Volts 480 380
P102 Motor NP Hertz 60 50
P103 Overload 0.9 0.9
P105 Maximum Frequency 60 80
P106 Start Source 1 1 2
P108 Speed Reference 1 1 4
P109 Acceleration Time 10 0.5
P110 Deceleration Time 10 0.5
A410 Preset Frequency 0 0 50
A451 Auto Restart Tries 0 9
A452 Auto Restart Delay 1 0