Ojmar OCS, Руководство пользователя

Страница: 29 / 33

OCS SOFTWARE OJMAR 27
5.1.2 Description of programming key's LED flashes
The programming key has a LED that indicates both operations it is carrying out and errors that may be occurring.
The different flashes emitted by the programming key when it communicates with the OCS lock are listed below.
GREEN LED RED LED AMBER LED DESCRIPTION
On Key waiting for connection to the PC
On Key connected to the lock or to the PC
Flashes (10) Operation correctly finished, the key can be removed
On Communication with lock ongoing, do not remove the key
On
(20 seconds)
The key has been removed before communication with the lock has
ended.
1x3 flashes Error type 1. Internal memory error in the key
2x3 flashes Error type 2. Low battery
3x3 flashes Error type 3. Communication error or incorrect sequence
4x3 flashes
Error type 4. Error during initialisation, all lock numbers stored in
the key have been programmed already
Table 4.2. Description of the programming key's flashes
5.1.3 Lock commands
The following actions can be done using the keypad.
The commands for configuring the lock always have to be done with the lock open.
OPERATION SEQUENCE
Close
F ree “start” +code+
Fixed manual locking “start” +previously assigned code+
Open
Free: “start” +code entered to close+
Fixed: “start” +previously assigned code+
Code change in fixed locks “start” +master code+new code+
Connection of the key with the lock “start” +button of the programming key
Event reading “start” +button of the programming key+wait a few seconds
Initialisation of the lock “start” +button of the programming key + “start” + +0+
Deleting of the lock “start” +button of the programming key + “start” + +1+
Master key “start” +button of the programming key (key programmed as master)
Service key “start” +button of the programming key (key programmed as master)
Master key opening “start” +master code+
Closing service code (only after opening with the
master)
“start” +master code+
Enable buzzer “start” +master code+15+
Deactivate buzzer “start” +master code+25+
Change master code “start” +master code+new master code+77+