OCS SOFTWARE
OJMAR
13
Figure 3.8.- Configuring a programming key as an initialisation key
In “Lock type” we will select “Free mode with coin/card”, “Free” or “Dedicated” depending on the type of OCS we are
going to initialise. The programming key can initialise locks consecutively, so that if we want to carry out this operation with the 2
to 10 locks, we will only have to select in “Initial” and “Final” these values and the key can be used to initialise one after another.
“Automatic opening” allows configuring an automatic opening depending on the time and day of the week selected. This
function is only configurable in free locks (with or without coin/card) and it will not appear when we have selected “Dedicated” as
“Lock type”.
“Lock renting duration time” allows defining a usage time of a lock after closing it. When this time has been exceeded, the
lock will open automatically. The rental time is configured by hours (from 0 to 23 hours) and quarters of an hour (0, 15, 30 or 45
minutes). Therefore, the maximum configurable time is from 23 hours to 45 minutes. The “Duration of locker rental” can only be
used in free lockers (with or without coin/card).
IMPORTANT NOTE: If the “Automatic Opening” option is selected, the “Duration of locker rental” option is disabled and vice
versa. Both functions are mutually incompatible.
The “Master code" is a 6-figure number that can be used to open the OCS when the user does not remember the sequence of
numbers he/she has entered to close his cupboard or locker. This field is optional in free locks but compulsory in fixed locks.
In “Time changes” the time zone in which the lock will be installed can be selected. In this way, the lock can be automatically
adapted to the summer or winter time putting its time back or forward depending on the selected time zone.
