OCS SOFTWARE
OJMAR
11
4.1.1.2 Eliminate locks
To eliminate an already created lock double left-click its icon again and on the window that appears click on the “
Delete”
button.
If you want to delete several locks at the same time select them using the “Control” or “Shift” key on the keyboard and keep it
pressed and double left-click the mouse on one of the icons. In the window click “
Delete” to delete the selected locks.
4.1.2 Programming key
The programming key is a peripheral of the OCS lock which can be used to carry out different functions such as initialising locks,
changing their configuration, reading events, operating as a master key.
4.1.2.1 Configurar y conectar la llave programadora
From “Communications
à
Programming key” or pressing the
icon accesses the screen from which the programming
key and its functions is managed.
Before accessing this screen, make sure that all of the programming key's controllers are properly installed.
Check that when the key is connected to a USB port the LED turns on in amber. This means that the key is connected to the
computer, but that it has not been connected to the software yet. When you go to the “Programming key” the first time, the
software will try to connect to the programming key automatically, analysing the active USB ports in the computer. The following
screen will be displayed while this operation is being carried out.
Figure 3.5.- Attempting to connect to the programming key
When the detection has finished, the
button will change to
indicating that the key is
connected and ready for use. In the same way, the key's LED will turn from amber to green.
If for any reason the software cannot automatically connect to the key, you can retry the operation clicking the port
refresh
button or manually selecting the port from the dropdown list with active ports and clicking “
Connect”.
Figure 3.6.- Configuration of the programming key port
