OJ Electronics AHC-3000 страница 52 Скачать руководство пользователя

Страница: 52 / 56

INSTRUCTIONS Commissioning guide for AHC-3000

21.4 Copy a daily schedule to one or more days

If the operating patterns are identical for Monday through Friday, then use the “Copy” function.

Monday to selectable days for the entire week

√ The operation schedule that has now been specified as the operating pattern for Monday will be

copied to selected days.

Note

Copying functionality..!

If there are individual days that are not going to have the same operating pattern, even
though you have used the copying functionality, these days can subsequently be individually
changed.

(*1): Select “Daily schedule”.

(*2): Select the daily schedule (day) that will be used as “copy from”.

Check that the events are correctly scheduled.

(*3): Press the menu “Copy daily schedule to”.

(*4): Select the weekdays with a check mark

, that must use the same schedule as Monday.

Save by pressing “Back”

(*1)

(*2)

(*3)

(*4)

Содержание AHC-3000

























































Результаты поиска

Содержание AHC-3000

Отзывы:

Похожие инструкции для AHC-3000

Бренды по названию

Популярные бренды

OJ Electronics AHC-3000, Инструкция по эксплуатации

Результаты поиска

Содержание AHC-3000

Отзывы:

Похожие инструкции для AHC-3000

Бренды по названию

Популярные бренды