OJ Electronics AHC-3000 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 56

OJ Electronics AHC-3000 Скачать руководство пользователя страница 12

© 2018 OJ Electronics A/S

12

INSTRUCTIONS Commissioning guide for AHC-3000

Reset alarms:

Clear Alarms will clear all active alarms.

After activating “Clear alarms”, any alarms still active in the system will be re-triggered and shortly
after show up again in the alarm overview.

Up to 16 active and logged alarms will be listed.

Alarm details and description:

Select the actual alarm (*1)

Latest cleared alarms will be listed in the
alarm log: “Log date & alarm number” (*2)

13. Communication set-up

The AHC-3000 can communicate on:

• a BMS system via Modbus TCP/IP and Modbus RTU (see 13.1)

• Directly connected to a computer via a LAN cable (RJ45) (see 13.2)

The AHC-3000 can also be connected to the OJ Cloud via the internet or a mobile app via Bluetooth

13.1 Modbus TCP/IP – DHCP

If the AHC-3000 is connected to a local area network (LAN) with a DHCP server, select “

Dynamic

IP

” under the menu “

Static/Dynamic IP

”

The DHCP server will automatically set all the necessary information in the AHC-3000, including: IP
address, Netmask, Gateway and DNS.

As soon as the AHC-3000 receives an IP address, Netmask, Gateway and DNS from the DHCP
server, this information will be found in the menu below.

(*2)

(*1)

«
...
10
11
12
13
14
...
»

Содержание AHC-3000

























































Отзывы:

Нет отзывов